Absolutely humming regulation of every fan!

Controls the access automatically with integrated control software (motion flow) The hybrid controller needs approx. 5min to score the room and sends the data to the controller. No large fluctuations in the temperature or fan speed. The noise is reduced to a minimum.

The big difference from the Pro to the normal hybrid controller is the light sensor. So the control unit knows whether there is day or night.

Thanks to the Pro function, the control unit switches to the higher level for 7 minutes and thus ensures that the excess moisture is transported from the room. Otherwise, problems like gray mathema can occur. So that you can use the PRO function, it is important that you remove the light sensor's cap before connecting the device to the current!

Instructions for setting:

- connect your fan to the device. Exhaust air = out, supply air = in
- 1. button = set the minimum speed of your fan
- 2. Button = set the desired maximum temperature
- 3. button = set maximum speed of your fan
- Place the temperature sensor in the middle of your room. Direct draft and direct light radiation can falsify the measurement. It is best to place the sensor a little above the lamps or make a light trap for the sensor. It can take several minutes for the sensor and the controller to have replaced and adjusted.