The new combo meter P700 Pro2 with a modern, robust housing is equipped with a large display on which all values ​​can be read well. 

In addition, the software was upgraded: This means that precise measurements can be read faster from now on. The electrodes can be easily replaced in the event of wear or defect.

The COMBO meter P700 Pro2 measuring device is ideal for measurements of pH, EC, CF, PPM and temperature values ​​in liquid plant food, in water from swimming pools, whirlpools and ponds. 

You can easily switch between the different parameters by pressing the button. The measuring device is pre -calibrated and delivered with batteries.

Use:

1.   Put the mains plug into the socket and connect the USB connector to the measuring device.
   
2.   Connect the pH and EC electrodes on the measuring device.
   
3.   Take off the protective cap of the pH and EC electrodes.
   
4.   Turn on the measuring device.
   
5.   Dive the pH and EC electrodes into the liquid to be measured and lightly circle it until the measured values ​​stabilize.
   
6.   With the C/F key you switch between Celsius and Fahrenheit units. With the fashion button you switch between EC/CF and PPM measurements.
   
7.   Switch off the measuring device after use.
   
8.   Clean the pH and EC electrodes with tap water to minimize the risk of contamination.
   
9.   Bring the protective cap of the pH and EC electrodes again.
   

The measuring device is also suitable for constant use. To do this, the electrodes must be dipped into the solution to be measured. Note that the device must then be calibrated more often. Also check whether algae has accumulated on the electrodes and carefully clean them if necessary.

Specification:

Measuring area

• PH: 0.0 - 14.0 PH
  
• EC: 0.0 - 19.9 ms/cm
  
• CF: 0.0 - 199 CF
  
• PPM: 0 - 1999 ppm
  
• Temp.: 0 ° C ~ 50 ° C (32 ° f ~ 122 ° f)
  

resolution

• Ph: ± 0.1 ph
  
• EC: 0.1 MS/cm
  
• CF: 0.1 CF 
  
• PPM: 10 ppm
  
• Temp.: 0.1 ° C (1.0 ºF)
  

Measurability

• PH: ± 0.1 ph
  
• EC: ± 2% F.S.
  
• CF: ± 2% F.S.
  
• PPM: ± 2% F.S.
  
• Temp.: ± 0.5 ° C (32 ° f)
  
• Temperature equalization: 0 ° C - 50 ° C (32 ° F - 122 ° F)
  
• PPM scale 700 ppm
  

calibration

• PH: 2 Point Auto Cal 4.0 - 7.0 PH
  
• EC: 1 Point Auto Cal 1.4 - 3.0 - 12.88 EC
  

• Properties: battery display & automatic temperature compensation
  
• Energy supply: DV 6V equal current adapter with rechargeable battery
  
• Calibration display: if the calibration is correct
  
• Waterproof: IP65 (electrodes IP67 waterproof)
  
• Mass: 200 x 140 x 34 mm
  
• Weight: 418 grams
  

This product is sent directly by our supplier. Depending on the inventory, it can take up to 2 weeks for the order to be with you.