pH & EC measuring device | ProAquamaster Tools | Combo Meter P700 Pro 2

The new Combo Meter P700 Pro2 with a modern, robust housing is equipped with a large display on which all values can be easily read. 

The software has also been upgraded: This means that precise measurements can now be read more quickly. The electrodes can be easily replaced if they are worn or defective.

The Combo Meter P700 Pro2 measuring device is ideal for measuring pH, EC, CF, PPM and temperature values ​​in liquid plant food, in water from swimming pools, whirlpools and ponds. 

You can switch between the different parameters quickly and easily at the touch of a button. The meter comes pre-calibrated and with batteries.

Usage:

1.   Plug the power plug into the socket and connect the USB plug to the measuring device.
   
2.   Connect the pH and EC electrodes to the meter.
   
3.   Remove the protective cap from the pH and EC electrodes.
   
4.   Turn on the meter.
   
5.   Immerse the pH and EC electrodes in the liquid to be measured and let them circulate gently until the measured values ​​stabilize.
   
6.   Use the C/F button to switch between Celsius and Fahrenheit units. Use the MODE button to switch between EC/CF and PPM measurements.
   
7.   Turn off the meter after use.
   
8.   Clean the pH and EC electrodes with tap water to minimize the risk of contamination.
   
9.   Replace the protective cap on the pH and EC electrodes.
   

The measuring device is also suitable for constant use. To do this, the electrodes must be immersed in the solution to be measured. Please note that the device will then need to be calibrated more frequently. Also be sure to check whether algae has accumulated on the electrodes and clean them carefully if necessary.

Measuring range:

• pH: 0.0 - 14.0 pH
  
• EC: 0.0 - 19.9 mS/cm
  
• CF: 0.0 - 199 CF
  
• PPM: 0 - 1999 PPM
  
• Temp.: 0°C ~ 50°C (32°F ~ 122°F)
  

Resolution:

• pH: ± 0.1 pH
  
• EC: 0.1 mS/cm
  
• CF: 0.1 CF 
  
• PPM: 10PPM
  
• Temp.: 0.1°C (1.0ºF)
  

Measuring accuracy:

• pH: ± 0.1 pH
  
• EC: ± 2% F.S.
  
• CF: ± 2% F.S.
  
• PPM: ± 2% F.S.
  
• Temp.: ± 0.5°C (32°F)
  
• Temperature compensation: 0°C - 50°C (32°F - 122°F)
  
• PPM scale 700 PPM
  

Calibration:

• pH: 2 point auto cal 4.0 - 7.0 pH
  
• EC: 1 point auto cal 1.4 - 3.0 - 12.88 EC
  

• Features: Battery indicator & automatic temperature compensation
  
• Power supply: DV 6V DC adapter with rechargeable battery
  
• Calibration display: When calibrated correctly
  
• Waterproof: IP65 (electrodes IP67 waterproof)
  
• Dimensions: 200 x 140 x 34 mm
  
• Weight: 418 grams